Syntax: /msg ChanServ  REGISTER channel password description

Registers a channel in the ChanServ database.  In order
to use this command, you must first be a channel operator
on the channel you're trying to register.  The password
is used with the IDENTIFY command to allow others to
make changes to the channel settings at a later time.
The last parameter, which must be included, is a
general description of the channel's purpose.

When you register a channel, you are recorded as the
"founder" of the channel.  The channel founder is allowed
to change all of the channel settings for the channel;
ChanServ will also automatically give the founder
channel-operator privileges when s/he enters the channel.
See the ACCESS command (/msg ChanServ HELP ACCESS) for
information on giving a subset of these privileges to
other channel users.

NOTICE: In order to register a channel, you must have
first registered your nickname.  If you haven't,
/msg ChanServ HELP for information on how to do so.

Syntax: /msg ChanServ  IDENTIFY channel password

Authenticates you to ChanServ as the founder of the given
channel.  Many commands require you to use this command
before using them.  The password should be the same one
you sent with the REGISTER command.

Syntax: /msg ChanServ  LOGOUT channel nickname

This command will log the selected nickname out meaning they
would have to reidentify themselves to regain their access.

If you are the founder of the channel, you can log out anybody,
else you can only log out yourself.

Syntax: /msg ChanServ DROP channel

Unregisters the named channel.  Can only be used by
channel founder, who must use the IDENTIFY command first.

Syntax: /msg ChanServ  SET channel option parameters

Allows the channel founder to set various channel options
and other information.

Available options:
	

    
FOUNDER
			
Set the founder of a channel
    
SUCCESSOR
		
Set the successor for a channel
    
PASSWORD
			
Set the founder password
    
DESC
				
Set the channel description
    
URL
				
Associate a URL with the channel
    
EMAIL
			
Associate an E-mail address with the channel
    
ENTRYMSG
			
Set a message to be sent to users when they enter the channel
    
BANTYPE
			
Set how Services make bans on the channel
    
MLOCK
			
Lock channel modes on or off
    
KEEPTOPIC
		
Retain topic when channel is not in use
    
OPNOTICE
			
Send a notice when OP/DEOP commands are used
    
PEACE
			
Regulate the use of critical commands
    
PRIVATE
			
Hide channel from LIST command
    
RESTRICTED
		
Restrict access to the channel
    
SECURE
			
Activate ChanServ security features
    
SECUREOPS
		
Stricter control of chanop status
    
SECUREFOUNDER
	
Stricter control of channel founder status
    
SIGNKICK
			
Sign kicks that are done with KICK command
    
TOPICLOCK
		
Topic can only be changed with TOPIC
    
XOP
				
Toggle the user privilege system
	

Type /msg ChanServ HELP SET option for more information on a
particular option.

Syntax: /msg ChanServ  AOP channel ADD nick
        AOP channel DEL {nick | entry-num | list}
        AOP channel LIST [mask | list]
        AOP channel CLEAR

Maintains the AOP (AutoOP) list for a channel. The AOP
list gives users the right to be auto-opped on your channel,
to unban or invite themselves if needed, to have their
greet message showed on join, and so on.

The AOP ADD command adds the given nickname to the
AOP list.

The AOP DEL command removes the given nick from the
AOP list.  If a list of entry numbers is given, those
entries are deleted.  (See the example for LIST below.)

The AOP LIST command displays the AOP list.  If
a wildcard mask is given, only those entries matching the
mask are displayed.  If a list of entry numbers is given,
only those entries are shown; for example:

   AOP #channel LIST 2-5,7-9
      Lists AOP entries numbered 2 through 5 and
      7 through 9.

The AOP CLEAR command clears all entries of the
AOP list.

The AOP ADD and AOP DEL commands are limited to
SOPs or above, while the AOP CLEAR command can only
be used by the channel founder. However, any user on the
AOP list may use the AOP LIST command.

This command may have been disabled for your channel, and
in that case you need to use the access list. See
/msg ChanServ HELP ACCESS for information about the access list,
and /msg ChanServ HELP SET XOP to know how to toggle between
the access list and xOP list systems.

Syntax: /msg ChanServ  HOP channel ADD nick
        HOP channel DEL {nick | entry-num | list}
        HOP channel LIST [mask | list]
        HOP channel CLEAR

Maintains the HOP (HalfOP) list for a channel. The HOP
list gives users the right to be auto-halfopped on your
channel.

The HOP ADD command adds the given nickname to the
HOP list.

The HOP DEL command removes the given nick from the
HOP list.  If a list of entry numbers is given, those
entries are deleted.  (See the example for LIST below.)

The HOP LIST command displays the HOP list.  If
a wildcard mask is given, only those entries matching the
mask are displayed.  If a list of entry numbers is given,
only those entries are shown; for example:

   HOP #channel LIST 2-5,7-9
      Lists HOP entries numbered 2 through 5 and
      7 through 9.

The HOP CLEAR command clears all entries of the
HOP list.

The HOP ADD, HOP DEL and HOP LIST commands are
limited to AOPs or above, while the HOP CLEAR command
can only be used by the channel founder.

This command may have been disabled for your channel, and
in that case you need to use the access list. See
/msg ChanServ HELP ACCESS for information about the access list,
and /msg ChanServ HELP SET XOP to know how to toggle between
the access list and xOP list systems.

Syntax: /msg ChanServ  SOP channel ADD nick
        SOP channel DEL {nick | entry-num | list}
        SOP channel LIST [mask | list]
        SOP channel CLEAR

Maintains the SOP (SuperOP) list for a channel. The SOP
list gives users all rights given by the AOP list, and adds
those needed to use the AutoKick and the BadWords lists,
to send and read channel memos, and so on.

The SOP ADD command adds the given nickname to the
SOP list.

The SOP DEL command removes the given nick from the
SOP list.  If a list of entry numbers is given, those
entries are deleted.  (See the example for LIST below.)

The SOP LIST command displays the SOP list.  If
a wildcard mask is given, only those entries matching the
mask are displayed.  If a list of entry numbers is given,
only those entries are shown; for example:

   SOP #channel LIST 2-5,7-9
      Lists AOP entries numbered 2 through 5 and
      7 through 9.

The SOP CLEAR command clears all entries of the
SOP list.

The SOP ADD, SOP DEL and SOP CLEAR commands are
limited to the channel founder. However, any user on the
AOP list may use the SOP LIST command.

This command may have been disabled for your channel, and
in that case you need to use the access list. See
/msg ChanServ HELP ACCESS for information about the access list,
and /msg ChanServ HELP SET XOP to know how to toggle between
the access list and xOP list systems.

Syntax: /msg ChanServ  VOP channel ADD nick
        VOP channel DEL {nick | entry-num | list}
        VOP channel LIST [mask | list]
        VOP channel CLEAR

Maintains the VOP (VOicePeople) list for a channel.
The VOP list allows users to be auto-voiced and to voice
themselves if they aren't.

The VOP ADD command adds the given nickname to the
VOP list.

The VOP DEL command removes the given nick from the
VOP list.  If a list of entry numbers is given, those
entries are deleted.  (See the example for LIST below.)

The VOP LIST command displays the VOP list.  If
a wildcard mask is given, only those entries matching the
mask are displayed.  If a list of entry numbers is given,
only those entries are shown; for example:

   VOP #channel LIST 2-5,7-9
      Lists VOP entries numbered 2 through 5 and
      7 through 9.

The VOP CLEAR command clears all entries of the
VOP list.

The VOP ADD, VOP DEL and VOP LIST commands are
limited to AOPs or above, while the VOP CLEAR command
can only be used by the channel founder.

This command may have been disabled for your channel, and
in that case you need to use the access list. See
/msg ChanServ HELP ACCESS for information about the access list,
and /msg ChanServ HELP SET XOP to know how to toggle between
the access list and xOP list systems.

Syntax: /msg ChanServ  ACCESS channel ADD nick level
        ACCESS channel DEL {nick | entry-num | list}
        ACCESS channel LIST [mask | list]
        ACCESS channel CLEAR

Maintains the access list for a channel.  The access
list specifies which users are allowed chanop status or
access to ChanServ commands on the channel.  Different
user levels allow for access to different subsets of
privileges; /msg ChanServ HELP ACCESS LEVELS for more
specific information.  Any nick not on the access list has
a user level of 0.

The ACCESS ADD command adds the given nickname to the
access list with the given user level; if the nick is
already present on the list, its access level is changed to
the level specified in the command.  The level specified
must be less than that of the user giving the command, and
if the nick is already on the access list, the current
access level of that nick must be less than the access level
of the user giving the command.

The ACCESS DEL command removes the given nick from the
access list.  If a list of entry numbers is given, those
entries are deleted.  (See the example for LIST below.)

The ACCESS LIST command displays the access list.  If
a wildcard mask is given, only those entries matching the
mask are displayed.  If a list of entry numbers is given,
only those entries are shown; for example:

   ACCESS #channel LIST 2-5,7-9
      Lists access entries numbered 2 through 5 and
      7 through 9.

The ACCESS CLEAR command clears all entries of the
access list.

User access levels

By default, the following access levels are defined:

	

	
Founder
    
Full access to ChanServ functions; automatic opping upon entering channel.  Note that only one person may have founder status (it cannot be given using the ACCESS command).
	
10
         
Access to AKICK command; automatic opping.
	
5
          
Automatic opping.
	
3
          
Automatic voicing.
	
0
          
No special privileges; can be opped by other ops (unless secure-ops is set).
	
<0
      
May not be opped.
	
	
These levels may be changed, or new ones added, using the
LEVELS command; type /msg ChanServ HELP LEVELS for
information.

Syntax: /msg ChanServ  AKICK channel ADD {nick | mask} [reason]
        AKICK channel STICK mask
        AKICK channel UNSTICK mask
        AKICK channel DEL {nick | mask | entry-num | list}
        AKICK channel LIST [mask | entry-num | list]
        AKICK channel VIEW [mask | entry-num | list]
        AKICK channel ENFORCE
        AKICK channel CLEAR

Maintains the AutoKick list for a channel.  If a user
on the AutoKick list attempts to join the channel,
ChanServ will ban that user from the channel, then kick
the user.

The AKICK ADD command adds the given nick or usermask
to the AutoKick list.  If a reason is given with
the command, that reason will be used when the user is
kicked; if not, the default reason is "You have been
banned from the channel".
When akicking a registered nick the nickserv account
will be added to the akick list instead of the mask.
All users within that nickgroup will then be akicked.

The AKICK STICK command permanently bans the given mask
on the channel. If someone tries to remove the ban, ChanServ
will automatically set it again. You can't use it for
registered nicks.

The AKICK UNSTICK command cancels the effect of the
AKICK STICK command, so you'll be able to unset the
ban again on the channel.

The AKICK DEL command removes the given nick or mask
from the AutoKick list.  It does not, however, remove any
bans placed by an AutoKick; those must be removed
manually.

The AKICK LIST command displays the AutoKick list, or
optionally only those AutoKick entries which match the
given mask.

The AKICK VIEW command is a more verbose version of
AKICK LIST command.

The AKICK ENFORCE command causes ChanServ to enforce the
current AKICK list by removing those users who match an
AKICK mask.

The AKICK CLEAR command clears all entries of the
akick list.

Syntax: /msg ChanServ  LEVELS channel SET type level
        LEVELS channel {DIS | DISABLE} type
        LEVELS channel LIST
        LEVELS channel RESET

The LEVELS command allows fine control over the meaning of
the numeric access levels used for channels.  With this
command, you can define the access level required for most
of ChanServ's functions.  (The SET FOUNDER and SET PASSWORD
commands, as well as this command, are always restricted to
the channel founder.)

LEVELS SET allows the access level for a function or group of
functions to be changed.  LEVELS DISABLE (or DIS for short)
disables an automatic feature or disallows access to a
function by anyone other than the channel founder.
LEVELS LIST shows the current levels for each function or
group of functions.  LEVELS RESET resets the levels to the
default levels of a newly-created channel (see
HELP ACCESS LEVELS).

For a list of the features and functions whose levels can be
set, see HELP LEVELS DESC.

Syntax: /msg ChanServ  INFO channel [ALL]

Lists information about the named registered channel,
including its founder, time of registration, last time
used, description, and mode lock, if any. If ALL is
specified, the entry message and successor will also
be displayed.

By default, the ALL option is limited to those with
founder access on the channel.

Syntax: /msg ChanServ  LIST pattern

Lists all registered channels matching the given pattern.
(Channels with the PRIVATE option set are not listed.)
Note that a preceding '#' specifies a range, channel names
are to be written without '#'.

Syntax: /msg ChanServ  OP [#channel [nick]]

Ops a selected nick on a channel. If nick is not given,
it will op you. If channel and nick are not given,
it will op you on all channels you're on, provided you
have the rights to.

By default, limited to AOPs or those with level 5 access
and above on the channel.

Syntax: /msg ChanServ  DEOP [#channel [nick]]

Deops a selected nick on a channel. If nick is not given,
it will deop you. If channel and nick are not given,
it will deop you on all channels you're on, provided you
have the rights to.

By default, limited to AOPs or those with level 5 access
and above on the channel.

Syntax: /msg ChanServ  VOICE [#channel [nick]]

Voices a selected nick on a channel. If nick is not given,
it will voice you. If channel and nick are not given,
it will voice you on all channels you're on, provided you
have the rights to.

By default, limited to AOPs or those with level 5 access
and above on the channel, or to VOPs or those with level 3
and above for self voicing.

Syntax: /msg ChanServ  DEVOICE [#channel [nick]]

Devoices a selected nick on a channel. If nick is not given,
it will devoice you. If channel and nick are not given,
it will devoice you on all channels you're on, provided you
have the rights to.

By default, limited to AOPs or those with level 5 access
and above on the channel, or to VOPs or those with level 3
and above for self devoicing.

Syntax: /msg ChanServ  HALFOP [#channel [nick]]

Halfops a selected nick on a channel. If nick is not given,
it will halfop you. If channel and nick are not given,
it will halfop you on all channels you're on, provided you
have the rights to.

By default, limited to AOPs and those with level 5 access
and above on the channel, or to HOPs or those with level 4
and above for self halfopping.

Syntax: /msg ChanServ  DEHALFOP [#channel [nick]]

Dehalfops a selected nick on a channel. If nick is not given,
it will dehalfop you. If channel and nick are not given,
it will dehalfop you on all channels you're on, provided you
have the rights to.

By default, limited to AOPs and those with level 5 access
and above on the channel, or to HOPs or those with level 4
and above for self dehalfopping.

Syntax: /msg ChanServ  PROTECT [#channel [nick]]

Protects a selected nick on a channel. If nick is not given,
it will protect you. If channel and nick are not given,
it will protect you on all channels you're on, provided you
have the rights to.

By default, limited to the founder, or to SOPs or those with
level 10 and above on the channel for self protecting.

Syntax: /msg ChanServ  DEPROTECT [#channel [nick]]

Deprotects a selected nick on a channel. If nick is not given,
it will deprotect you. If channel and nick are not given,
it will deprotect you on all channels you're on, provided you
have the rights to.

By default, limited to the founder, or to SOPs or those with
level 10 and above on the channel for self deprotecting.

Syntax: /msg ChanServ  OWNER [#channel]

Gives you owner status on channel. If channel is not
given, it will give you owner status on all channels you're
on, provided you have the rights to.

Limited to those with founder access on the channel.

Syntax: /msg ChanServ  DEOWNER [#channel]

Removes your owner status on channel. If channel is
not given, it will remove your owner status on all channels
you're on, provided you have the rights to.

Limited to those with founder access on the channel.

Syntax: /msg ChanServ  INVITE channel

Tells ChanServ to invite you into the given channel.

By default, limited to AOPs or those with level 5 and above
on the channel.

Syntax: /msg ChanServ  UNBAN channel

Tells ChanServ to remove all bans preventing you from
entering the given channel.

By default, limited to AOPs or those with level 5 and above
on the channel.

Syntax: /msg ChanServ  KICK [#channel [nick [reason]]]

Kicks a selected nick on a channel. If nick is not given,
it will kick you. If channel and nick are not given,
it will kick you on all channels you're on, provided you
have the rights to.

By default, limited to AOPs or those with level 5 access
and above on the channel.

Syntax: /msg ChanServ  BAN [#channel [nick [reason]]]

Bans a selected nick on a channel. If nick is not given,
it will ban you. If channel and nick are not given,
it will ban you on all channels you're on, provided you
have the rights to.

By default, limited to AOPs or those with level 5 access
and above on the channel.

Syntax: /msg ChanServ  TOPIC channel [topic]

Causes ChanServ to set the channel topic to the one
specified. If topic is not given, then an empty topic
is set. This command is most useful in conjunction
with SET TOPICLOCK. See /msg ChanServ HELP SET TOPICLOCK
for more information.

By default, limited to those with founder access on the
channel. 

Syntax: /msg ChanServ  CLEAR channel what

Tells ChanServ to clear certain settings on a channel.  what
can be any of the following:

	

	
MODES
	
Resets all modes on the channel (i.e. clears
              modes i,k,l,m,n,p,s,t).
	
BANS
		
Clears all bans on the channel.
	
EXCEPTS
	
Clears all excepts on the channel.
	
INVITES
	
Clears all invites on the channel.
	
OPS
		
Removes channel-operator status (mode +o) from all channel operators.
	
HOPS
		
Removes channel-halfoperator status (mode +h) from all channel halfoperators, if supported.
	
VOICES
	
Removes "voice" status (mode +v) from anyone with that mode set.
	
USERS
	
Removes (kicks) all users from the channel.
	

By default, limited to those with founder access on the
channel.

Syntax: /msg ChanServ  GETKEY channel

Returns the key of the given channel. This is a command
mainly intended to be used by bots and/or scripts, so
the output is in the following way:

KEY <channel> <key>

key is "NO KEY" if no key is set.

Syntax: /msg ChanServ  SENDPASS channel

Send the password of the given channel to the e-mail address
set in the founder's nickname record. This command is really
useful to deal with lost passwords.

May be limited to IRC operators on certain networks.

Syntax: /msg ChanServ  AUTOVOICE channel {REG|ALL|STATUS|OFF}

Enable or disable automatic voicing of users upon joining
a channel. The REG option will voice only registered users 
whereas the ALL option will voice all users. OFF option 
will disable auto voicing on the channel. STATUS option 
will return autovoice status for the channel.

By default, limited to SOPs or those with level 10 and above 
on the channel access list.